Why Polish?

Polishing your wheels using a wheel polishing tumbler machine is a cost-effective solution that can restore the shine of your wheels, prevent corrosion, and improve overall vehicle performance. Not only will your vehicle look better, but it can also run more efficiently and have a higher resale value.

Our Polishing Process

  • Preparation

    The first step is to prepare the wheel for polishing by cleaning it thoroughly to remove any dirt, grime, or debris. It is important to make sure that the wheel is completely dry before proceeding to the next step.

  • Application

    The next step is to apply the polishing compound to the wheel. This can be done by placing the wheel and the polishing compound into the tumbler machine and turning it on. The machine will agitate the polishing compound and spread it evenly over the surface of the wheel.

  • Polishing

    Once the polishing compound has been applied, the machine should be turned on and left to run for several hours. The machine will tumble the wheel and the polishing compound together, which will remove any surface imperfections and leave a smooth, polished finish.

  • Finishing

    After the wheel has been polished, it should be removed from the tumbler machine and inspected for any remaining imperfections. Any areas that need further attention can be polished again by repeating the previous steps. Finally, the wheel should be thoroughly cleaned and dried before being installed back onto the vehicle.

FAQs

  • While it is possible to polish wheels by hand, a tumbler machine can provide more consistent results and be less labor-intensive. However, it is important to use the machine correctly to avoid damage to the wheels.

  • A tumbler machine can help to remove surface scratches from wheels, but it may not be effective for deep scratches or damage.

  • The time it takes to polish a wheel with a tumbler machine can vary depending on the condition of the wheel and the polishing process used. It can take anywhere from a few hours to several days to achieve the desired level of shine.

  • A wheel polishing tumbler machine uses a rotating drum or container to tumble the wheel together with polishing compounds, abrasives, and cleaning agents, which work together to remove surface imperfections and leave a polished finish.